Dynaudio Delta 80 4-Channel Power Amplifier

Dynaudio Delta 80 is a maximum-output 2U network audio power amplifier designed for the most demanding studio and installation environments. Combining extreme power, low distortion, and support for analogue and Dante network audio, it delivers uncompromising performance with professional system flexibility.

Dynaudio Delta 80 4-Channel Power Amplifier

Dynaudio Delta 80 is the most powerful amplifier in the Delta series, built around the core philosophy of reliability, trust, and transparent amplification. Every design decision is focused on ensuring that the incoming signal is reproduced exactly as intended, only at significantly higher levels, while maintaining control, stability, and low distortion under extreme operating conditions.

Housed in a 2U chassis, Dynaudio Delta 80 delivers an exceptional level of output power, producing up to 2000W per channel into 4 ohms, or an extraordinary 4000W when channels are bridged. Despite these output levels, the amplifier operates with impressively low distortion and noise, with THD measured at less than 0.18 percent at 1kHz. This makes Dynaudio Delta 80 suitable for large-format monitoring systems, high-output multi-way speaker configurations, and demanding fixed installations.

Dynaudio Delta 80 supports up to four channels of audio, selectable between analogue inputs and audio over IP via Dante. When operating over Dante, audio is converted using high-quality 24-bit, 96kHz digital-to-analogue converters, preserving resolution and accuracy throughout the signal path. This dual-mode operation ensures long-term compatibility with both traditional analogue infrastructures and modern networked audio systems.

To support mission-critical applications, Dynaudio Delta 80 includes built-in back-up amplifier redundancy, allowing production or system operation to continue even in the event of an amplifier issue. For multi-way systems, the amplifier can be directly connected to a Delta DSP amplifier using a single Cat 5 cable, eliminating the need for external processing hardware and simplifying system integration.

With its combination of extreme power output, controlled performance, and flexible connectivity, Dynaudio Delta 80 is engineered to deliver maximum headroom and reliability in professional rack-based environments.

Features

  • 2U high-power network audio power amplifier
  • Up to four channels of analogue or Dante network audio
  • 24-bit, 96kHz DACs for Dante operation
  • Extremely high output power per channel
  • Bridged channel operation for maximum output capability
  • Low distortion and noise performance at high power levels
  • Back-up amplifier redundancy for critical applications
  • Direct Cat 5 connection to Delta DSP amplifiers
  • Designed for high-output studio and installation use

Specifications

  • Output Power Per Channel: 1000W into 8Ω, 2000W into 4Ω, 2200W into 2.7Ω, 2000W into 2Ω
  • Output Power Bridged: 4000W into 8Ω, 4000W into 4Ω
  • THD: <0.18% at 1kHz, <0.2% from 20Hz to 20kHz at 1dB below maximum output power
  • Gain: 32dB
  • Sensitivity: +8.3dBu for maximum power (2.0V)
  • Frequency Response: 20Hz to 20kHz ±0.5dB
  • Input Impedance: 20kΩ active balanced
  • Input CMRR: >60dB
  • Damping Factor: >400 at 8Ω / 1kHz
  • Input Sources: 4 analogue inputs, 4 networked audio inputs switchable in banks of four
  • Signal Limiters: Operate at maximum power to prevent excessive clipping
  • Protection: Output short circuit, DC, over-temperature, mains inrush control, over-voltage, over-current
  • Power Consumption: 4.1A at 240V into 4Ω, 8.2A at 120V into 4Ω
  • Dimensions: 88mm x 482mm x 428mm
  • Weight: 10.1kg
SKU DAD80 Category Tag Brand:

Click to access the login or register cheese