Tec7 X-Tack

Tec7 X-Tack | Extreme Bonding Without Support

Fast, Reliable Bonding with TEC7 X-TACK – No Clamps, No Fuss.

Experience the power of TEC7 X-TACK, the ultimate instant grab adhesive for professional and DIY applications. Designed to hold instantly without the need for clamps, screws, or temporary supports, X-TACK gives you full control during installation—saving time and effort on every job.

For best results, always prep your surface with TEC7 CLEANER. This safe, effective solvent cleaner eliminates grease, dust, and residue to ensure a perfectly clean surface and maximum adhesive performance.

TEC7 X-TACK and CLEANER: The go-to combination for fast, clean, and professional-grade bonding.

X-Tack Benefits

• The fastest assembly adhesive of all MS polymers
• Super strong, structual bonding
• Vibration, impact and shock resistant 100% waterproof assembly and can be painted over with most lacquers and paints
• Odourless and solvent-free, so it can be used in confined spaces
• Permanently elastic
• Perfect for vertical bonding
• Does not sag up to a 40mm thick joint
• X-TACK replaces soldering, bolts, nuts, nails etc and save you time and money

X-Tack Uses

• Wall and facade covering: ACM, plaster, natural stone, brick, concrete, aluminium, glass, etc.
• Internal coverings: Acoustic panels, whiteboards, decorative sheeting etc.
• Sign installation: ACM panels
• Ceiling panels: All thermal panels, synthetic panels, wood, PVC, PUR, etc.
• Window frames: Coated aluminium, solid wood, synthetic
• Door frames and window sills: Natural or coated, natural stone, brick, concrete, aluminium, brass etc. Does not leak
• Floor, wall tiles and plinths: Marble, granite, blue stone, porous materials and earthenware
• Roofing elements: All roofing elements made from wood, steel or in combination with roof covering and lead sheets (excludes bitumen)
• Construction elements: All construction elements made from stainless steel, aluminuim, metal, copper, etc.

Tec7 X-Tack Technical Information

• Basis: MS polymer.
• Specific weight: 1.49 g/cm³.
• Viscosity: hard paste.
• Shore hardness (DIN 53505) after 3 weeks at 23°C/50%.
• Relative humidity: +/- 54 Shore A.Shrinkage (DIN 52451): approx. 5%.
• Density (DIN EN 27390): does not sag up to a 40 mm thick joint.
• Elongation at break: > 500%.
• Modulus at 100% elongation 23°C (DIN 53504 S2): 1.0 N/mm².
• Tensile strength (DIN 53504 S2): 2.2 N/mm².
• Skin formation: 3-5 minutes.
• Hardening time: 24h – 2.7mm; 48h – 4mm.
• Temperature resistance: -40°C to +90°C.
• Processing temperature: from +5°C to +40°C.
• Chemical resistance:
• Good: water, salt water, aliphatic solvents, oils, greases, diluted organic acids and lyes.
• Moderate: esters, ketones and aromatics.
• Poor: concentrated acids and chlorinated solvents.
• Weather resistance: perfect.
• Shelf life: 15 months in closed, original packaging.
• Safety measures: please read the safety data sheet.