TensorGrip L20

Introducing TensorGrip L20: Your Ultimate Web Spray Adhesive for Woodworking Applications

TensorGrip L20 is a high-performance web spray adhesive suitable for bonding High-Pressure Laminate (HPL), hard plastics, GRP, foams, and fabrics to a variety of substrates, including MDF, chipboard, plywood, and many other timber sheet materials. Specifically designed for permanent bonding where immediate bond strength, water resistance, and high heat resistance are paramount, L20 delivers exceptional performance in woodworking applications.

Benefits of TensorGrip L20:

• Fast Drying: Ensures efficient workflow with quick adhesion
• Good Heat Resistance: Withstands high temperatures for long-lasting bonds
• Very High Solids: Provides robust bonding for durable results
• Portable Systems: Offers flexibility in application settings
• Non-Chlorinated Adhesive: Environmentally friendly formulation
• Easy Application Control: Ensures precise adhesive application
• LEED Compliant: Meets environmental standards for sustainable construction
• Halogen Free: Does not contain halogenated compounds for enhanced safety

Directions For Use:

1. Ensure surfaces are clean, dry, and free from contaminants.
2. Use with adequate ventilation and shake the canister well before use.
3. Attach and secure the hose tightly onto the spray gun with the required tip.
4. Open the valve on the canister slowly and fully, checking for leaks.
5. Test compatibility by spraying a small test patch of the adhesive on the substrate.
6. Apply a uniform coat of adhesive to both surfaces to be bonded, achieving 80% to 100% coverage.
7. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched.
8. Press surfaces together with adequate pressure and use a roller for uniform pressure.
9. Allow 24 hours for the adhesive to cure fully.
10. Clean the spray tip with solvent if clogged; do not use a pin on the spray tip orifice.

Canister Storage/Changeover:

• Turn the valve on the canister to the off position and spray out the remaining adhesive.
• Disconnect the spray hose and gun from the canister.
• Reconnect the spray hose to a canister of cleaning solvent and spray out until clear.
• Alternatively, leave the valve on the canister open if leaving the hose and spray gun attached; otherwise, close and lock the spray gun.

Experience the superior bonding performance of TensorGrip L20 in your woodworking projects. Contact us today to learn more about its applications and benefits.